Renovation

Insulating layer with a thickness 180 mm is able to prevent both excessive in summer, as well as insufficient winter temperatures in the attic.

There are three options for arranging an insulating layer – pod, between and above the rafters. The first solution has almost only disadvantages: …

Visible ceiling beams and rafters create a cozy atmosphere in the attic of a country house.

If the wooden roof structure is to be visible throughout the attic, smoothed material should be used for all rafters and beams. This, in turn, causes quite a significant increase in its costs …

17. At the outside corners, the raised carpet is cut at an angle of 45 ° all the way to the floor. Then both parts must be pressed against the edge of the wall and cut.

18. A corner square is cut in the corner like this, so that its top reaches to the corner of the room, both …

8. Carpet knife (with covered blade and guide tip) it is indispensable when cutting thicker materials.

9. Curvilinear contours can be cut exactly with scissors, if you mark them beforehand with a felt-tip pen on the carpet, according to the appropriate template.

10. Best for cutting …

When measuring the area of ​​the floor to be coated, it is necessary to take into account the door and window recesses. The distances from wall to wall are measured, not including skirting boards. Just in case, each band is added to approx 10 cm.

1. Old carpets work best …

You don't need a lot of tools to lay carpet. These include a sharp spatula for cleaning the substrate with a sharp knife, a metal ruler serving as a guide when cutting and a putty knife with teeth for spreading the glue.
For example, an electric stripper better and faster …

If the repairman says, that something needs to be measured horizontally and vertically, he means measurements carried out with the help of devices called plumbs and spirit levels, respectively. The pawn is a conical weight suspended on a rope, which, thanks to the action of gravity, indicates the geometric center …

1. After drawing the contours of the bases on plywood, both boards should be folded into a bundle and temporarily joined with nails.

2. In the corners of the resulting figures, 10-millimeter holes are drilled for the jigsaw blade.

3. The contours of the base are cut with a jigsaw with a work table.

4. Moldings …

1. On sheets of ribbed cardboard we draw the contours of all the walls and the roof. Length notches and tenons must be marked very accurately 3 cm.

2. Using a ruler and a utility knife, we cut out all the parts. Be careful when cutting out the corners, because it eats easily …

Sandstone. If someone likes the rustic style, that is, wooden ceiling beams and walls made of natural stone, he does not have to buy a country estate right away. You can add a bit of idyllic simplicity to your current home by making a wall, which will give the impression of being made of blocks …