Tree transplanting machines

Attempts to technically improve the transplanting of large trees led to the construction, followed by major improvements to the special transplanting machines. The machines are operated by one person, you can dig holes with this machine, dig up, transport and plant trees. Such a machine can be self-propelled or tied to a truck, tractor etc.. The machine works by pressing four spoons around the tree. Diameter of the cut solid, depending on the type of machine, it can be up to 2m. The buckets are pressed into the ground by hydraulic equipment. Sharp edges of spoons when they are pressed into the ground, they carve out a lump of earth, while cutting the roots.

Then, the entire device, along with the tree, rises and tilts above the vehicle chassis. In this position, the machine is ready for the road. Planting a tree involves the machine carrying out these operations in reverse order. Hole, in which the tree is to be planted, it should be previously dug by the same machine, which ensures precise adaptation of the shape of the solid to the walls of the pit, The great advantage of this machine is the possibility of digging up trees with lumps of different diameters: 0,5-2,0 m. The variable diameter of the conical handle is obtained by properly spacing the spoons before pressing them into the ground. The machine can also be used for transplanting trees with a prepared root system. The excavation process with setting up the machine takes only a few minutes and does not require manual work. The efficiency of the tree transplanting machine is very high and, depending on the length of the runs, it can vary from several to several dozen trees per day.